1, cosmetic bottles (including plastic bottles, glass bottles)
(1) cosmetic bottle complete, smooth and smooth, the thickness of the basic uniform, no cold burst, cracks, no obvious scarring, deformation.
(2) Cosmetic bottle end straight, smooth, no burr (burr), thread, etc. with the structure intact, correct.
(3) cosmetic bottle clean inside and outside.
(4) cosmetic bottle and cosmetic cap tightly with no sliding teeth, loose, leakage phenomenon.
2, cosmetic caps (including cover, cover (plug, pad))
(1) inner cover
① complete, smooth and no deformation, clean, dust-free, oil and so on.
② with cosmetic bottles and cosmetic caps with good, shall not leak.
① correct, smooth, no broken, cracks, burrs (burrs) and burst phenomenon, uniform color, not color, consistent with the standard sample.
② thread, etc. with the structure intact.
③ plus anodized aluminum or bronzing should be uniform and complete, the same color and standard samples.
④ clamshell cover turned flexible.
⑤ cosmetic caps and cosmetic bottles with tight, no sliding teeth, loose, leaks and so on. Cosmetic Plastic Hoses
(1) tube body smooth, clean, uniform thickness, no obvious scratches, the same color and standard samples.
(2) seal should be strong, may not have openings, wrinkles and so on.
(3) caps should meet the requirements of 2.2.
4, spray cans
(1) The tank body is smooth, rust-free, and the weld is smooth. The main parts are not obviously scratched, the color is uniform and consistent with the standard sample.
(2) smooth mouth, no cracks and deformation.
(3) caps should meet the requirements of 2.2. Cosmetic Plastic Hoses, Coupling Hoses,